Home»Trade Compliance»Analysis of New Export Tax Rebate Policies in 2024: How Do Enterprises Respond to Adjustments?
Recently, the Ministry of Finance and the State Taxation Administration issued an important announcement, adjusting the policies for many products including aluminum and copper products.Export DrawbackThe new policy takes effect on December 1, 2024. For many enterprises involved in related commodities, it undoubtedly requires readjusting strategies to cope with the new situation. Today, we will analyze this announcement in detail to helpimport and exportFor enterprises, it undoubtedly needs to readjust its strategy to cope with the new situation. Today, we will analyze this announcement in detail to helpforeign tradeEnterprises can better understand these policy changes and their potential impacts.
I. Overview of Policy Adjustments
According to the announcement, this adjustment mainly involves the following points:
Cancel the export tax rebates for some products The export tax rebate policies for products such as aluminum materials, copper materials, and chemically modified animal and vegetable oils have been cancelled. This means that enterprises exporting these products will lose the opportunity to get a refund of the paid value - added tax, which may increase the export costs. The specific commodity codes and names can be found in Annex 1.
Reduce the export tax rebate rates for some products Refined oil products,photovoltaicproducts, batteries, and some non - metallic mineral products, the export tax rebate rate has been reduced from the original 13% to 9%. This policy reduction mainly affects export enterprises that have been accustomed to using a higher tax rebate rate to control costs.
Implementation Time The new regulations will come into effect on December 1, 2024. Enterprises need to pay special attention to the export date on the customs declaration form to determine the applicable export tax rebate rate.
II. Analysis of the Product List with Export Tax Rebates Cancelled
The types of products with export tax rebates cancelled this time are quite extensive, including a large number of copper alloy and aluminum alloy products. The following are some important product categories:
Copper Products: Including bars, rods, profiles, and sheets of materials such as copper - zinc alloy and copper - nickel alloy. After the cancellation of the export tax rebate, enterprises will face higher export costs, which may affect their competitiveness in the international market.
Aluminum products: A variety of aluminum alloy profiles, sheets, and pipes are also included in the list of products with export tax rebates cancelled. Especially for some aluminum products mainly applied in the construction, transportation, and electronics industries, the cancellation of the tax rebate may force exporters to re - evaluate the product pricing.
Chemically Modified Animal and Vegetable Oils: Such oils are widely used in the food processing and chemical industries. The cancellation of their export tax rebates means that the export of these products will also face a greater tax burden.
III. Impact of the Reduction in Export Tax Rebate Rates for Some Products
For the reduction in the export tax rebate rates of refined oil products, photovoltaic products, and some mineral products, although the change range from 13% to 9% is not huge, for some enterprises, its impact cannot be ignored. For example:
Photovoltaic Products: The photovoltaic industry has always been a key - supported area by the country. The reduction in the tax rebate rate may affect the profit margins of domestic enterprises in the short term, and thus have a certain impact on their global competitiveness.New energyRefined Oil Products
: The reduction in the export tax rebate rates for products including vehicle gasoline, diesel, and aviation kerosene may lead to a decline in the price competitiveness of relevant export enterprises in the international market, especially in the face of the uncertainty of international oil price fluctuations.Facing the above - mentioned changes in the export tax rebate policy, enterprises should take measures as soon as possible to cope with the possible impacts:
IV. Countermeasures and Suggestions for Enterprises
Adjust the Product Pricing Strategy
The cancellation of tax rebates or the reduction in tax rebate rates will directly increase the costs of export products. Enterprises can consider appropriately raising the export prices to make up for the increase in tax burden. At the same time, they can also consider optimizing the production process and reducing other operating costs to ease the pressure brought by the tax rate adjustment. Diversify the Market Layout
Enterprises should consider exploring more international markets to diversify the risks that may be brought about by policy changes. Especially for enterprises exporting photovoltaic products and refined oil products, exploring non - traditional markets may be an important way to avoid the impact of policies. Actively Utilize Other Preferential Policies
While the export tax rebate policy is tightened, enterprises can pay attention to and utilize other tax incentives or subsidy policies provided by the government. For example, some local governments provide certain tax support for high - tech products or environmentally friendly products. Enterprises should actively apply for these preferential policies to reduce the comprehensive costs. Closely Monitor Policy Dynamics
This adjustment reflects the changes in the countrys export - oriented policies for some industries. Enterprises should closely monitor other relevant policies that may be introduced in the future, especially the dynamics of tariffs, trade protection measures, etc., so as to respond quickly and ensure compliant operation. Commodity Code
Chemically modified animal, vegetable or microbial oils and fats (including their fractions and non - edible oils or preparations made by mixing the oils and fats of this chapter, excluding products of heading 1516)
15180000
Bars, rods, profiles and shaped profiles of chromium - zirconium copper
74071010
Bars and rods of copper - zinc alloy (brass) (straightness ≤ 0.5mm/meter)
74072111
Other bars and rods of copper - zinc alloy (brass) (straightness > 0.5mm/meter)
74072119
Profiles and shaped profiles of copper - zinc alloy (brass)
74072190
Other bars, rods, profiles and shaped profiles of copper alloys (including bars, rods, profiles and shaped profiles of cupronickel or German silver)
74072900
Refined copper wire with maximum cross - sectional dimension > 6mm
74081100
Refined copper wire with cross - sectional dimension ≤ 6mm
74081900
Wire of copper - zinc alloy (brass)
74082100
Wire of copper - nickel - zinc - lead alloy (leaded German silver)
74082210
Wire of other copper alloys
74082900
Refined copper plates, sheets and strips in coils (thickness > 0.15mm, with oxygen content not exceeding 10PPM)
74091110
Refined copper plates, sheets and strips in coils (thickness > 0.15mm, oxygen content not exceeding 10PPM)
74091190
Other refined copper plates, sheets and strips in coils (thickness > 0.15mm)
74091900
Other refined copper plates, sheets and strips (thickness > 0.15mm)
74092100
Copper-zinc alloy (brass) plates, sheets and strips in coils (thickness > 0.15mm)
74092900
Other copper-zinc alloy (brass) plates, sheets and strips (thickness > 0.15mm)
74093100
Copper-tin alloy (bronze) plates, sheets and strips in coils (thickness > 0.15mm)
74093900
Other copper-tin alloy plates, sheets and strips (thickness > 0.15mm)
74094000
Plates, sheets and strips made of cupronickel or German silver (thickness > 0.15mm)
74099000
Other copper alloy plates, sheets and strips (thickness > 0.15mm)
74101100
Refined copper foil without backing (thickness ≤ 0.15mm)
74101210
Copper-nickel alloy foil or copper-nickel-zinc alloy foil without backing (thickness ≤ 0.15mm)
74101290
Other copper alloy foil without backing (thickness ≤ 0.15mm)
Other refined copper foil with backing (thickness (excluding backing) ≤ 0.15mm)
74102210
Copper-nickel alloy foil or copper-nickel-zinc alloy foil with backing (thickness (excluding backing) ≤ 0.15mm)
74102290
Other copper alloy foil with backing (thickness (excluding backing) ≤ 0.15mm)
74111011
Refined copper tubes with internal (external) threads or fins with outer diameter ≤ 25mm
74111019
Other refined copper tubes with outer diameter less than or equal to 25mm
74111020
Refined copper tubes with outer diameter > 70mm
74111090
Other refined copper tubes
74112110
Copper-zinc alloy (brass) tubes in coils
74112190
Other copper-zinc alloy (brass) tubes
74112200
Cupronickel or German silver tubes
74112900
Other copper alloy tubes
76042100
Hollow profiled sections made of aluminum alloy
7604291010
Cylindrical solid aluminum alloy (ultimate tensile strength can reach 460 MPa or more at 293K (20 °C))
76042990
Other aluminum alloy profiles and profiled sections
76061121
Non-alloy aluminum rectangular plates, sheets and strips of aluminum-plastic composite (0.3mm ≤ thickness ≤ 0.36mm)
76061129
Other non-alloy aluminum rectangular plates, sheets and strips (0.3mm ≤ thickness ≤ 0.36mm)
76061191
0.2mm<厚<0.3mm或厚>0.36mm非合金鋁制鋁塑復合矩形板、片及帶(包括正方形)
76061199
0.2mm<厚<0.3mm或厚>0.36mm非合金鋁制其他板、片及帶(包括正方形)
76061220
Aluminum alloy rectangular thin plates, sheets and strips (including squares) (thin plates refer to 0.2mm < thickness < 0.28mm)
76061230
Aluminum alloy rectangular medium and thick plates, sheets and strips (including squares) (medium and thick plates refer to 0.28mm ≤ thickness ≤ 0.35mm)
76061251
0.35mm<厚度≤4mm 鋁合金制鋁塑復合的矩形厚板、片及帶(包括正方形)
76061259
Other aluminum alloy rectangular thick plates, sheets and strips (including squares) with 0.35mm < thickness ≤ 4mm
76061290
Aluminum alloy rectangular thick plates, sheets and strips (including squares) with thickness > 4mm
76069100
Non-alloy aluminum non-rectangular plates, sheets and strips (thickness > 0.2mm)
76069200
Aluminum alloy non-rectangular plates, sheets and strips (thickness > 0.2mm)
76071110
Unbacked aluminum foil not further processed after rolling (thickness ≤ 0.007mm)
76071120
Unbacked aluminum foil not further processed after rolling (0.007mm < thickness ≤ 0.01mm)
76071190
Unbacked aluminum foil not further processed after rolling (0.01mm < thickness ≤ 0.2mm)
76071900
Other unbacked aluminum foil (thickness ≤ 0.2mm)
76072000
Backed aluminum foil (thickness ≤ 0.2mm)
76081000
Pure aluminum tubes
76082010
Aluminum alloy tubes with outer diameter not exceeding 10 cm
76082091
Aluminum alloy tubes with outer diameter exceeding 10 cm and wall thickness not exceeding 25 mm
76082099
Other aluminum alloy tubes
76090000
Aluminum tube fittings
Product List with Export Tax Rebate Rates Reduced
Commodity Name
Chemically modified animal, vegetable or microbial oils and fats (including their fractions and non - edible oils or preparations made by mixing the oils and fats of this chapter, excluding products of heading 1516)
25041091
Spheroidized graphite (products obtained by spheroidizing and grading natural graphite, with diameter less than 120 microns)
27101210
Motor gasoline and aviation gasoline
27101911
Jet fuel
27101923
Diesel oil
38180019
Monocrystalline silicon wafers with diameter > 15.24cm (doped for use in the electronics industry)
68022120
Travertine and products simply cut or sawn (with one flat surface)
68029110
Stone carvings made of marble, travertine and steatite
68029190
Other processed marble, steatite and articles thereof (including processed travertine and articles thereof)
68029210
Other stone carvings made of limestone
68029290
Other processed limestone and articles thereof
68029311
Stone carvings and tombstone made of granite
68029319
Other stone carvings made of granite
68029390
Other processed granite and articles thereof
68029910
Other stone carvings (excluding those made of slate)
68029990
Other processed stones and articles thereof (excluding slate and articles thereof)
68030010
Processed slate and slate articles
68030090
Agglomerated slate articles
68041000
Stone mills and grindstones for grinding or pulping
68042110
Grinding wheels made of agglomerated synthetic or natural diamond
68042190
Other stone mills, grindstones and similar articles made of agglomerated synthetic or natural diamond
68042210
Other grinding wheels (made of other agglomerated abrasive or ceramic)
68042290
Other stone mills, grindstones and similar articles (made of other agglomerated abrasive or ceramic)
68042310
Grinding wheels made of natural stone
68042390
Other stone mills, grindstones, etc. made of natural stone (including similar articles)
68043010
Hand - held oilstones for polishing
68043090
Other hand - held grindstones and polishing stones
68051000
Abrasive cloth (whether or not cut, sewn or otherwise worked into shape)
68052000
Abrasive paper (whether or not cut, sewn or otherwise worked into shape)
68053000
Abrasive paper - like articles not based on cloth or paper
68061010
Aluminosilicate fibres and articles thereof
68061090
Other slag wool, rock wool and similar mineral wools, in blocks, sheets or rolls
68080000
Panels, plates, tiles, bricks and similar articles (made by bonding vegetable fibres, straw, shavings, etc. with cement and other minerals as materials)
68091100
Unfinished gypsum boards, sheets, bricks, tiles and similar articles (lined or reinforced with paper or cardboard)
68091900
Unfinished gypsum boards (including sheets, bricks, tiles and similar articles) lined or reinforced with other materials
68099000
Other gypsum articles (including articles made of composite materials with gypsum as the main component)
68101100
Building bricks and stone blocks made of cement (whether or not reinforced)
68101910
Bricks, tiles, flat stones (including similar articles) made of artificial stone (whether or not reinforced)
68101990
Other bricks, tiles, flat stones (including similar articles) made of cement or concrete (whether or not reinforced)
68109110
Reinforced concrete and prestressed concrete pipes, etc. (whether or not reinforced)
68109190
Precast components for construction or civil engineering made of cement (whether or not reinforced)
68109910
Cement sleepers for railways
68109990
Other articles made of cement, concrete or artificial stone
68114010
Corrugated sheets containing asbestos
68114020
Sheets, plates, bricks, tiles and similar articles containing asbestos
68114030
Pipes and pipe fittings containing asbestos
68114090
Other articles containing asbestos
68118100
Corrugated sheets not containing asbestos
68118200
Sheets, plates, bricks, tiles and similar articles not containing asbestos
68118910
Pipes and pipe fittings not containing asbestos
68118990
Other articles not containing asbestos
68128000
Crocidolite or crocidolite mixtures and articles thereof
68129100
Other clothing (including clothing accessories, hats, shoes and boots) made of asbestos or asbestos mixtures
68129910
Other paper, hemp - fibre boards and felts made of asbestos or asbestos mixtures
68129920
Compressed asbestos - fibre jointing materials in sheets or rolls (excluding crocidolite articles)
68129990
Other articles made of asbestos or asbestos mixtures
68132010
Brake linings and pads containing asbestos (made of friction materials with asbestos as the basic component)
68132090
Friction materials containing asbestos and other articles for braking and other uses (composed mainly of asbestos as raw material)
68138100
Other brake linings and pads (made of friction materials with other minerals or cellulose as the basic component)
68138900
Other friction materials and articles for braking and other uses (composed mainly of other minerals or cellulose as raw material)
68141000
Plates, sheets and strips made of agglomerated or reproduced mica (whether or not attached to other materials)
68149000
Other processed mica and its articles (including agglomerated or reproduced mica and other articles)
68151200
Carbon fiber fabrics
68151310
Carbon fiber prepregs (products)
68151390
Other carbon fiber products
69039000
Other refractory ceramic articles
69041000
Ceramic building bricks
69049000
Ceramic floor tiles, supporting or filling bricks (including similar articles)
69051000
Ceramic roof tiles
69059000
Other ceramic building articles (including chimney cowls, ventilating caps, chimney linings, architectural ornaments)
69060000
Ceramic sleeves, conduits, troughs and pipe fittings
69072110
Facing bricks and floor tiles with a size less than 7 cm (water absorption not exceeding 0.5%)
69072190
Other facing bricks and floor tiles (water absorption not exceeding 0.5%)
69072210
Facing bricks and floor tiles with a size less than 7 cm (water absorption exceeding 0.5% but not exceeding 10%)
69072290
Other facing bricks and floor tiles (water absorption exceeding 0.5% but not exceeding 10%)
69072310
Facing bricks and floor tiles with a size less than 7 cm (water absorption exceeding 10%)
69072390
Other facing bricks and floor tiles (water absorption exceeding 10%)
69073010
Mosaic tiles with a size less than 7 cm and similar articles
69073090
Other mosaic tiles and similar articles
69074010
Facing ceramics with a size less than 7 cm
69074090
Other facing ceramics
69091100
Porcelain for laboratories, chemical or other technical uses
69091200
Technical ceramics with Mohs hardness ≥ 9
69091900
Other porcelain for laboratories and chemical uses (including other technical uses)
69099000
Ceramic containers for agricultural, transportation or cargo loading purposes
69101000
Porcelain washbasins, bathtubs and similar sanitary appliances
69109000
Earthenware washbasins, bathtubs and similar sanitary appliances
69111011
Bone china tableware
69111019
Other porcelain tableware
69111021
Porcelain kitchen knives
69111029
Other porcelain kitchen utensils
69119000
Other porcelain for household or toilet use
69120010
Earthenware tableware
69120090
Earthenware kitchen utensils (including those for household or toilet use)
69131000
Porcelain statues and other decorative porcelain articles
69139000
Earthenware statues and other decorative earthenware articles
69141000
Other porcelain articles
69149000
Other earthenware articles
70010010
Blocks of colorless optical glass
70010090
Other broken glass and waste glass; glass blocks
70023200
Other unworked glass tubes (made of glass with a coefficient of linear expansion less than 5×10^-6/K)
70023900
Unworked glass tubes not elsewhere specified
7003190001
Original plate glass for liquid crystal or OLED display substrates (cast or rolled non-wired glass plates and sheets)
7005290002
Original plate glass for liquid crystal or OLED display substrates (non-wired float glass plates and sheets)
70060000
Glass of headings 7003 - 7005 processed otherwise (not framed or assembled)
70071110
Toughened safety glass for aerospace vehicles and ships
70071190
Toughened safety glass for vehicles
70071900
Other tempered safety glass
70072110
Laminated safety glass for aircraft, spacecraft and ships
70072190
Laminated safety glass for vehicles
70072900
Other laminated safety glass
70080010
Insulating and sound - proof glass components with hollow or vacuum structure
70080090
Other multi - layer insulating and sound - proof glass components
70091000
Vehicle rear - view mirrors (whether or not framed)